Choose fontsize:
Welcome, Guest. Please login or register.
News
Shane123
February 19, 2020, 02:45:48 PM
 Sorry my Bad thinking of going to ogmore by sea any one ad any luck there before
Shane123
February 19, 2020, 02:45:07 PM
 ogmore
Neil
February 13, 2020, 11:57:12 AM
 Welcome on board by the way!
Neil
February 13, 2020, 11:57:00 AM
 Unfortunately they used to be monthly but not held one for a couple of years now.
FoxyFoster
February 10, 2020, 02:15:53 PM
 Hello all Smiley How often do you do ralleys locally? and is anyone off to detectival this April ?
celticspikey
February 09, 2020, 06:32:25 PM
 Hi guys I'm still around lol. Post up bits ltr. You ok Val X 
Val Beechey
January 28, 2020, 07:01:59 PM
 Slow motion these days John. But still having a go.

View All

 

Currently there is 1 User in the Chatroom!





Click here if you
need van signs


Or here if you
need magnetic signs


Or here if you
need a
Corporate Video Production Company in Milton Keynes

See our
privacy policy here


Pages: [1]
  Print  
Author Topic: Detech ultimate coil problem  (Read 904 times)
rainyday
Sr. Member
****
Offline Offline

Posts: 268



« on: January 07, 2018, 03:10:52 PM »

I bought a detech ultimate coil for my safari on 3/4/17, under a year ago from an ebay shop, today my machine starting playing up.  After a quick look the were the cable goes thru the shaft the wire could be damaged due to movement in the coil, Ive not had this problem with other machines or with the original coil.
I did read someone else had the same problem with the same problem.  Anyone else heard of this?
I have contacted he seller but I doubt they will do anything to help.
Thanks
D
Logged
Mike
Moderator
Superhero Member
*****
Offline Offline

Posts: 2094



« Reply #1 on: January 07, 2018, 05:15:29 PM »

check connection between cable and machine ( silver threaded bit ) can work loose and cause issues  ,
Logged

NEVER TRUST A FART !!!!!!!
rainyday
Sr. Member
****
Offline Offline

Posts: 268



« Reply #2 on: January 07, 2018, 05:22:15 PM »

Hi, Iíve done that but still no good.
Thanks tho
D
Logged
dingdong
Superhero Member
******
Offline Offline

Posts: 2965


MAD COWS EAT METAL DETECTORISTS !!!🐂🐂🐂🐂🐂🐂


« Reply #3 on: January 07, 2018, 06:37:25 PM »

Hi "Rainyday".... firstly... happy New year...👍
With regards to your coil problem,it may well worth you removing the coil cover,as sometimes very,very small particles of aluminium can find their way underneath the coil cover and in turn give you some real erratic responses.
I've had a similar problems especially after/during a beach hunt.
Anyway,just a thought....Good hunting..👍
Logged
rainyday
Sr. Member
****
Offline Offline

Posts: 268



« Reply #4 on: January 07, 2018, 07:11:32 PM »

Hi dingdong, happy new year buddy Smiley
I have heard this happening before, I will give it a go but I think it might be the cable,
Thanks
D
Logged
kencomet
Full Member
***
Offline Offline

Posts: 170


« Reply #5 on: January 07, 2018, 09:47:18 PM »

Had the same problem, I found one or two  of the leads into the coil were open circuit, I managed to re- solder them, it worked fine for a few trips out, but failed again, if you can solder them ! and seal the joints [ which I failed to do } you may get lucky, I ended up buying a new Ultimate coil, good luck . Ken.
Logged
rainyday
Sr. Member
****
Offline Offline

Posts: 268



« Reply #6 on: January 08, 2018, 07:01:32 AM »

Thanks Ken I will have a look later tonight and see if they can be soldered.
D
Logged

Pages: [1]
  Print  
 
Jump to:  


Home
SimplePortal 2.3.3 © 2008-2010, SimplePortal