Choose fontsize:
Welcome, Guest. Please login or register.
January 16, 2019, 05:00:21 PM
 Looks like it Neil, but a bit different than norm.
January 16, 2019, 04:29:15 PM
 Looking forward to seeing it.
January 16, 2019, 04:28:52 PM
 ooh you talking a limoges figure? I found one in the front of Mikes van once he was yet to ID! 
January 16, 2019, 02:37:00 PM
 Medieval figure, post tonight guys.
Phil Penderyn
January 15, 2019, 11:56:30 PM
 I guess i,ll turn the lights off ...Click !
January 10, 2019, 12:56:19 PM
 Afternoon all hows it going 
January 06, 2019, 06:23:21 PM
 Well done Newport

View All


Currently there is 1 User in the Chatroom!

Click here if you
need van signs

Or here if you
need magnetic signs

Or here if you
need a
Corporate Video Production Company in Milton Keynes

See our
privacy policy here

Pages: [1]
Author Topic: Coil depth ?  (Read 6222 times)
Rally attendee
Offline Offline

Posts: 1

« on: July 19, 2016, 09:34:42 PM »

Hi all can anyone recommend a coil to make a lobo ST deeper please ??
Superhero Member
Offline Offline

Posts: 2965


« Reply #1 on: July 20, 2016, 06:46:52 PM »

Hi Glenn,not sure but have a look at the range of Mars metal detector coils.
I've started using them on my MACRO RACER,a be using them has increased the depth capabilities of the machine by a good 4" also the don't need a coil cover and that's to be with a look....hope this helps...👍
Jr. Member
Offline Offline

Posts: 91

« Reply #2 on: July 21, 2016, 12:38:49 PM »

for your information when selecting other coils for the Tesoro lobo it is very important that you choose a coil with the right configuration to your detector.the choice of coils which are available are normally either concentric or dd.choosing the wrong configuration could really affect the performance of your detector but there are lots of Tesoro made coils available either concentric or dd the largest being a 12"x10" and the smallest being 4"diameter.
Jr. Member
Offline Offline

Posts: 56

« Reply #3 on: July 21, 2016, 07:59:49 PM »

Hi Glenn.
I used a Lobo Super Traq for about six years, and still have it. It was a superb machine for finding hammered coins and small artifacts, but only when detecting on clean non-contaminated sites. It was a horror on mineralised and trashy sites and also on very wet grass due to false signals.
I believe the reason it behaved like this was because it worked at an operating frequency of just under 18000 kHz which is high for a single frequency machine.
My concern is that you may decide on a larger coil to achieve the extra depth you desire, only to exacerbate any over-sensitivity problems.

Pages: [1]
Jump to:  

SimplePortal 2.3.3 © 2008-2010, SimplePortal