Choose fontsize:
Welcome, Guest. Please login or register.
News
jamiepearce
January 17, 2024, 07:59:51 PM
 Evening.been out the picture for a few years.is there any weekenders coming up this year?
rookypair
January 04, 2024, 09:57:08 AM
 I think everyone has dispersed in all directions. Good to see some of the original peeps posting to 
rjm
January 03, 2024, 11:26:38 PM
 This site is pretty dead now! 
TOMTOM
January 03, 2024, 05:38:50 PM
 HI IM HERE ANY RALLYS
dances with badgers
December 28, 2023, 09:40:42 AM
 the dreaded social media lol
DEADLOCK
December 27, 2023, 08:26:38 AM
 Still going social media plays a big part 
dances with badgers
December 26, 2023, 10:41:07 PM
 This site used to be amazing, where has everybody gone? 

View All

 

Currently there is 1 User in the Chatroom!





Click here if you
need van signs


Or here if you
need magnetic signs


Or here if you
need a
Corporate Video Production Company in Milton Keynes

See our
privacy policy here


Pages: [1]
  Print  
Author Topic: looks like V3 is now here and the manual is ready to download  (Read 5084 times)
galoshers
Sr. Member
****
Offline Offline

Posts: 365


« on: June 11, 2013, 07:42:40 PM »

from the XP website
Logged
galoshers
Sr. Member
****
Offline Offline

Posts: 365


« Reply #1 on: June 11, 2013, 07:49:22 PM »

http://www.xpmetaldetectors.com/images/update_deus/Page_update_UK.pdf
Logged
galoshers
Sr. Member
****
Offline Offline

Posts: 365


« Reply #2 on: June 11, 2013, 07:52:49 PM »

03 - FINEST ADJUSTMENT OF GROUND EFFECT !
- Each ground balance step between 60
and 95 receives an additional division of
fine adjustment to allow for better ground
tracking (pg:17).
- In the MANUAL or TRACKING mode, you
have the ability to add a variable notch on
the ground balance scale and eliminate
false signals caused by hot rocks or other
ground conditions (between 82 and 90) (pg 40).
04 - NOW 10 FACTORY PROGRAMS + 8 USER
 PROGRAMS THAT YOU CAN SAVE !
8 Memory slots have been added to save
your user programs. The first 10 factory
programs can be modified, but they will
not be saved after turning the Deus off, but
you can now save them using the 8 new program
slots (Option>Program>Save) (pg 22).
For users that control their Deus with the
WS4 and WS5 headphones, programs
can now be saved and deleted with the
headphone controls just like the remote
control! (pg 31).
05 - SILENCER MORE EFFICIENT !
The Silencer can mask iron signals with little
reduction in target separation as experienced
in V2.0. For example on beaches and
parks, the Silencer will be useful to reject
rusty bottle caps which are normally difficult
to reject (choose Silencer level 4). Also,
do not hesitate to increase it if you want to
cancel the inconsistent (crackling) signals
from iron. The Silencer can be deactivated
when it is set at -1 (pg39).
06- STRONGER AUDIO RESPONSE !
Thanks to 2 added audio level points (0 to 7
instead 0 to 5), you can now further amplify
weak signals from smaller or deeper targets.
Be careful as it will also amplify noise from
electrical interference or difficult fields (pg 15)
Logged
galoshers
Sr. Member
****
Offline Offline

Posts: 365


« Reply #3 on: June 11, 2013, 07:53:33 PM »

07 - TWO NEW AUDIO MODES - 5 TONES AND
 FULL TONES !
- 5 Tones: the targets can now be separated
into 5 user-adjustable audio tones.
- Full Tones: Audio tones change according
to the conductivity of the target. The higher
the target’s conductivity, the higher the
pitch of the tone (pg 37).
08 - PITCH MODE ADJUSTABLE
The pitch of the fundamental frequency
tone is now adjustable from 150 Hz to 600
Hz (pg 36).
09 - ID NORM
The Target ID value for a specific target
will be consistent across the 4 operating
frequencies when the ID Norm option is
activated (pg 27).
10 - NON MOTION IMPROVED AND EASIER
To facilitate the manual ground adjustments
in the NON MOTION AUDIO DISC and NON
MOTION AM mode, the actual Ground Balance
value under the coil is now displayed in
the arrow. Pump the coil to the ground to
refresh the value and enter the value
displayed to ground balance your Deus.
An accurate ground balancing will give
you a more stable audio threshold and
a deeper machine. An extended range
of ground balance values is also now
available in this mode (pg 21).
... +
- Ability to delete a coil from the list (pg 25 and 31).
- The target’s ID is now displayed at the top of
the left screen in the submenus.
- FREQUENCY SHIFT has been improved: you
can now search closer to other Deus users
thanks to improved filtering (pg 39).
Logged

Pages: [1]
  Print  
 
Jump to:  


Home
SimplePortal 2.3.3 © 2008-2010, SimplePortal