Choose fontsize:
Welcome, Guest. Please login or register.
October 18, 2018, 02:16:19 PM
 Nice1 Phil, well atleast u know your not going to miss much buddy..
Phil Penderyn
October 18, 2018, 01:26:16 AM
 You get the feeling your getting everything, good and bad
Phil Penderyn
October 18, 2018, 01:25:40 AM
 Yes Dave, bought the one off DaiMole, good machine.
October 17, 2018, 03:48:31 PM
 Hi Phil did u get that 4pi buddy..
October 15, 2018, 10:28:33 PM
 Got the 3 pictures Dale
October 15, 2018, 10:23:06 PM
 Nothing attached Dale ?
October 15, 2018, 10:04:19 PM
 Just sent you a email from my gmail

View All


Currently there is 1 User in the Chatroom!

Click here if you
need van signs

Or here if you
need magnetic signs

Or here if you
need a
Corporate Video Production Company in Milton Keynes

See our
privacy policy here

Pages: [1]
Author Topic: Xp dues  (Read 2094 times)
Rally attendee
Offline Offline

Posts: 19

« on: May 23, 2012, 03:06:56 PM »

I was wondering if someone could help with settings with Basic 1 programme . I've tried to use it in all metal by lowering the discrimination to zero but i lose the lower tone . I've tried to increase iron volume but doesn't work . Could anyone tell me what I'm doing wrong .thanks . Fran.
Superhero Member
Offline Offline

Posts: 2488

XP Deus

« Reply #1 on: May 23, 2012, 10:06:24 PM »

The lower tone is set to the Discrimination level set, so you will lose that Tone if you put Discrimination at 0.

All factory programs use 3 tones. To get around the problem you can use 4 tone.

In Basic 1 program, Iron Volume is set at 0.

Have the coil to hand when you make these changes. Scroll down to Iron Volume and increase as required.

Pages: [1]
Jump to:  

SimplePortal 2.3.3 © 2008-2010, SimplePortal