DetectingWales.com

Metal Detector Programs => Minelab Programs => Topic started by: JohnF on December 02, 2008, 11:11:54 PM



Title: Simple, effective program for X Terra 70
Post by: JohnF on December 02, 2008, 11:11:54 PM
Sensitivity: As high as poss without chatter. (Important to use high sensitivity with the X Terra as depth capability can drop dramaticly below 25ish)
Volume: max (adjust with headphones)
Noise cancel: Auto
Threshold: To suit user
Tones: 2
Ground balance: Auto
Track: on
Search pattern: All metal
This is the set up i use on 99% of sites i visit and has served me very well indeed.
Dig all high tones, ignore solid low tones. On very noisy sites i may use pattern 1 with -8 & -6 blocked out and slow my sweep speed right down.
my favourite coil is the 10.5 round DD med freq 7.5, Its a brilliant coil that offers the best depth, stability and is sensitive to the smallest hammered coins. It seems much more decisive on signals than the high frequency coils.
Happy Hunting.  ;D


Title: Re: Simple, effective program for X Terra 70
Post by: Steve Morris on December 11, 2008, 06:10:06 PM
My hammered coin rate went up with John's program, very simple and very effective!

John and I found 2 seperate cut halfs within meters of each other with no problems

On the trashy sites, i pop my 70 into pattern 1 and pump the threshold up to 10, iron will give you a blank in the threshold background hum. Watching John in the field is a lesson worth learning, very clinical and always gets results

Steve


SimplePortal 2.3.3 © 2008-2010, SimplePortal