DetectingWales.com

Metal Detectors => Teknetics => Topic started by: muddy on April 01, 2015, 10:39:54 AM



Title: 10x5 wss sef coil
Post by: muddy on April 01, 2015, 10:39:54 AM
Hi all has anyone used the 10x5 wss sef coil any adivce or reviews most welcome thanks


Title: Re: 10x5 wss sef coil
Post by: Chef Geoff on April 01, 2015, 10:50:59 AM
Hi Muddy
Yes I tested one for Detech when it was first released on an Explorer, they are very nice coils with good depth and separation but they are a little on the heavy side which came as a bit of a shock after the lightness of the Ultimate coils, this could even be exaggerated on the Teknetics as they are lighter machines making them considerably "nose heavy" :-\


Title: Re: 10x5 wss sef coil
Post by: muddy on April 01, 2015, 06:53:33 PM
Thanks geoff was thinking of getting one for trashy sites and agree how lite the ultimate coil is as its been my stock coil since i put it on is there any other coils for t2 for trashy areas that suits the t2 thanks


Title: Re: 10x5 wss sef coil
Post by: Rob Two Spades on April 01, 2015, 06:59:37 PM
The nel sharpshooter for the t2 is good on trashy sites


Title: Re: 10x5 wss sef coil
Post by: Chef Geoff on April 01, 2015, 07:21:40 PM
Teknetics now make a nice 10"x 5" elliptical of their own which is meant to be good
http://www.fortbedfordmetaldetectors.com/teknetics-10-5-dd-elliptical (http://www.fortbedfordmetaldetectors.com/teknetics-10-5-dd-elliptical)
The problem is you might have to order it from the States, failing that one I don't think you can beat the 8"x 6" SEF for getting in amongst the iron which would be my choice as the others are still 10" and trash doesn't just go sideways ;)
http://www.ebay.co.uk/itm/NEW-8X6-SEF-Coil-For-Teknetics-T2-Inc-Coil-Cover-/271610642356?_trksid=p2054897.l4275 (http://www.ebay.co.uk/itm/NEW-8X6-SEF-Coil-For-Teknetics-T2-Inc-Coil-Cover-/271610642356?_trksid=p2054897.l4275)


SimplePortal 2.3.3 © 2008-2010, SimplePortal