DetectingWales.com

Metal Detector Programs => Teknetics Programs => Topic started by: EMU Ex Minelabuser on June 05, 2011, 06:36:36 PM



Title: Usefull Programs For the T2
Post by: EMU Ex Minelabuser on June 05, 2011, 06:36:36 PM
Hi all
Does anyone have any tried and tested programs for the t2 they would like to share please
Darren


Title: Re: Usefull Programs For the T2
Post by: Chef Geoff on June 05, 2011, 07:14:52 PM
To start with I would set up the T2 like this, sens 75, disc 22, 2+ tones and dig all signals over 45...Coke nearly always comes in at 43.
If you get a site with little coke and want the extreme depth that the T2 can give then set your sens as high as pos, 1 tone and disc 21.
Or... all metal, 1 tone, very deep.
Great machines to use, I still miss mine.


Title: Re: Usefull Programs For the T2
Post by: Rob Two Spades on June 05, 2011, 10:01:18 PM
I like to run mine noisy so I have sensitivity about 70 (but this can vary between 55 and 85 depending on soil conditions) and I have discrimination on 4 nearly always. If its a naily site I'll go with discrimination on 50. It's still very deep on 50. Finally on ploughed with lots of iron minerals I'll go with all metals and listen for clean signals.


Title: Re: Usefull Programs For the T2
Post by: EMU Ex Minelabuser on June 08, 2011, 10:30:22 AM
the field i am in at the moment has a shed load of coke but they give a nice tight signal
Darren


SimplePortal 2.3.3 © 2008-2010, SimplePortal