Title: Pulse induction beach & Inland Post by: Moncó on January 19, 2014, 04:40:55 PM Hi ladies & gents
I currently have a Whites pulse induction Dual field detector for the beach / surf But was looking to buy a Pulse Induction that works both on the beach / surf as well as inland ( don´t want Minelab / multi frequency detectors don´t pick up gold chains ) but want extreme depth inland. I was thinking of a Garrett infinium, do any of you lads / ladies know if it is any good or not, or an alternative detector, maybe an older Fisher ? ? ? Possibly the CZ 21. Title: Re: Pulse induction beach & Inland Post by: probono on January 19, 2014, 05:26:15 PM i thought that PIs drive you mad if you use them inland!
I tried one once and it was pinging all the time (a Whites PI) Title: Re: Pulse induction beach & Inland Post by: StumbledUpon on January 19, 2014, 05:43:08 PM The fisher CZ21 is a dual frequency machine, 5 -15khzs
Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 19, 2014, 07:26:09 PM your wrong monco minelabs do pick up chains ,i have had a few with my etrac and my sovereign.pulse machines will get the thiner chains though better than the vlfs .
Title: Re: Pulse induction beach & Inland Post by: celticspikey on January 19, 2014, 08:14:22 PM Hi ladies & gents I agree with badger, it also depends whether or not the chain is lying flat out or in a ball,my Excalibur had no problem picking up chains in the surf, mite get one again and get back in the water on south coast this summer, I miss it ;) ;)I currently have a Whites pulse induction Dual field detector for the beach / surf But was looking to buy a Pulse Induction that works both on the beach / surf as well as inland ( don´t want Minelab / multi frequency detectors don´t pick up gold chains ) but want extreme depth inland. I was thinking of a Garrett infinium, do any of you lads / ladies know if it is any good or not, or an alternative detector, maybe an older Fisher ? ? ? Possibly the CZ 21. Title: Re: Pulse induction beach & Inland Post by: Moncó on January 19, 2014, 08:18:54 PM Take a look at the gold chain and the multifrequency doesn´t pick it up, I have done this test myself with an Explorer and Safari and they simply don´t pick up gold chains, ( 50 seconds )
Undisturbed Dirt Depth Test -- Minelab, Garrett, Fisher, DeepTech in the Test Trench (http://www.youtube.com/watch?v=elpZY99S6I0#ws) The Multifrequency machines have difficulty picking up gold chains.. Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 19, 2014, 08:47:03 PM depends on the size and the way that the chain is lying ,if its all bunched up you dont get a problem.try testing in wet sand
Title: Re: Pulse induction beach & Inland Post by: Chef Geoff on January 19, 2014, 10:11:09 PM It doesn't matter if it's bunched up but it does depend on the thickness of the chain, you're right Monco in that FBS machines are blind to medium/thin chains, a metal detector doesn't see a chain it sees links ie multiple small signals not one big one. If you're finding chains with FBS then you're probably detecting catches or pendants ;)
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 19, 2014, 10:19:54 PM It doesn't matter if it's bunched up but it does depend on the thickness of the chain, you're right Monco in that FBS machines are blind to medium/thin chains, a metal detector doesn't see a chain it sees links ie multiple small signals not one big one. If you're finding chains with FBS then you're probably detecting catches or pendants ;) Thanks Chef Geoff.. I may just keep the Whites PI for the beach and then buy a 2nd Hand PI for inland..it will take a little more research though.. but I am open to suggestions.. Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 20, 2014, 07:17:34 PM i find chains lol :D.not many but i do
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 20, 2014, 07:30:32 PM I don´t want to start a detector war or say that any detector a colleague may have is or isn´t any good.
I have a T 2 Special edition a G 2 a Whiotes pulse induction dual field, I had a Minelab X terra 505 ace 150 / 250 and Euroace But before I spend any more money on a detector I want to make sure I but the right tool. I might scrub my initial question and just go for an Inland Pulse Induction Any suggestions ? ? ? Title: Re: Pulse induction beach & Inland Post by: keepmateethinajar on January 20, 2014, 10:55:24 PM ::) ::) ::)...I had a garrett infinium....load of rubbish....heavy...shaft would bend when you held it up....signal was 2 beeps...awfull machine.....sold it to a man with a white stick..... ::) ::) ::) ::) ::) ::)
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 21, 2014, 01:00:32 AM ::) ::) ::)...I had a garrett infinium....load of rubbish....heavy...shaft would bend when you held it up....signal was 2 beeps...awfull machine.....sold it to a man with a white stick..... ::) ::) ::) ::) ::) ::) After starting this topic I have done some research, and I was suprised by some detectorists complaining about the Infinium, aparently not one of the best... .. ... Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 21, 2014, 08:38:00 AM theres plenty of good pulse machines out there monco,try findmall treasure forums.the americans love a pulse machine.speak to some american pulse users before you buy one
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 21, 2014, 09:53:38 AM theres plenty of good pulse machines out there monco,try findmall treasure forums.the americans love a pulse machine.speak to some american pulse users before you buy one Thanks dances with badges... Makes a lot of sense.. Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 21, 2014, 09:12:15 PM good luck mate
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 22, 2014, 09:55:37 AM Thanks..
Theres allways the ATX, but it is too recent and expensive.. :-\ Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 22, 2014, 10:17:30 PM i would wait to see what happens with the new garret,i have not heard much about it yet.im waiting to see how they operate on the beaches and some finds
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 23, 2014, 08:59:27 AM Hi Dances with wolves
I have became a member of an American site as you suggested, make sense.... As for the ATX I agree entirely, too recent to know if it is any good or not and too expensive. I would prefer an older 2nd Hand machnie in order to not be over commited to a machine which I would only use very rarely.. I have time, I will keep the questions firing and the research going... Thanks all for the replies.. Title: Re: Pulse induction beach & Inland Post by: StumbledUpon on January 23, 2014, 12:13:27 PM You could have a look at the Whites TDI, claims to have some discrimination, or the old cs6pi, good cheap machine
Title: Re: Pulse induction beach & Inland Post by: Moncó on January 23, 2014, 12:26:56 PM The CScope is an option.. :)
Title: Re: Pulse induction beach & Inland Post by: dances with badgers on January 24, 2014, 04:06:07 PM the cscope is a good option,im going for an eric foster beachscan when i have saved up some cash.
if you can find a deepstar 3 they are awsome,i saw my cousins get a coin at 26'' on the beach last week and a 1 gram thin childs gold ring at 15''. they are hard to come by but they are mad machines |