DetectingWales.com

Metal Detecting Discussions => Beach Detecting => Topic started by: stickygreen on March 01, 2012, 09:28:40 PM



Title: a good beach detector
Post by: stickygreen on March 01, 2012, 09:28:40 PM
Can you guys recommend a good but cheap beach detector please thanks


Title: Re: a good beach detector
Post by: handyman [Alan} on March 01, 2012, 09:30:49 PM
dances with badges will search the beach for £20 .. is that cheap enough??? ;D ;D ;D ;D


Title: Re: a good beach detector
Post by: Chef Geoff on March 01, 2012, 09:35:23 PM
The best there is is probably a Minelab Sovereign (any model) which can be had for around the £250-300 mark. Other than that you are probably looking at a whites machine but the price is not going to be much cheaper. Unfortunately "Good" and "Cheap" are not two words that go together with metal detectors.


Title: Re: a good beach detector
Post by: Da Monkey on March 01, 2012, 09:48:08 PM
dances with badges will search the beach for £20 .. is that cheap enough??? ;D ;D ;D ;D

I'm sure he's been down the beach and come home with much less than £20 LOL...  ;D

Minelabs are great for the beach, If you want a Whites for the beach forget the XLT for anything other than dry sand. I had both the DFX and XLT, DFX is great on the wet sand, but the XLT was no good at all, lots of falsing on the wet stuff.  V3i etc. should also be fine on the wet stuff but too expensive. They do make a nice "Beach Hunter ID" (since been upgraded a bit, but basically same machine) essentially a DFX in a fully waterproof box with waterproof headset so you can even dive with it.  You can find em cheap on times, but are harder to get hold of. My detecting buddy has one, seen it running on the beach but not in the water yet.   

So DFX or Minelab I guess....


Title: Re: a good beach detector
Post by: dances with badgers on March 01, 2012, 11:16:49 PM
i will do it for nothing and most of the time i do lol ::)


Title: Re: a good beach detector
Post by: Val Beechey on March 01, 2012, 11:20:20 PM
No one mentioned the Whites M6. Thats what I've got and its great on everything, wet or dry, inland or on the beach.
Not often you see them 2nd hand but worth a look.

Val


Title: Re: a good beach detector
Post by: Chef Geoff on March 01, 2012, 11:25:02 PM
Well I did say whites lol. But your right either the DFX, M6 or MXT are pretty good on the beach.


Title: Re: a good beach detector
Post by: peanut on March 02, 2012, 05:00:56 PM
I'd agree about the Minelabs but even the older used Sovereigns seem to be going for big money these days.
If you want a good cheap detector that is very useable on the beach you could try the Minelab Musketeer /Advantage which often go for about £200 on fleabay. but they are a heavy machine with a 10" coil.

You might also look at the garrett AT Pro International. Its completly waterproof and can be completly submerged apparently but I don't know how good it is on mineralised black sand ? otherwise a Garrett Euroace can be had new for as little as £250 and they are certainly useable on the beach as can be attested by our Ferrett who has done very well off the beach with his.

If you intend to work the beaches predomininatly then you really should be considering a specialised detector but if like the rest of us you like to mix it a bit then one of the cheap Garretts will do you proud


Title: Re: a good beach detector
Post by: stickygreen on March 02, 2012, 07:21:38 PM
Thanks for the replies it be for beach only as i have a new t2 which is quite good on the dry sand but not so on wet.


Title: Re: a good beach detector
Post by: banjo on March 09, 2012, 08:28:47 PM
minelab soveriegn gt,it;s a pleasure to use on the beach and couldn't imagine using anything else :)


Title: Re: a good beach detector
Post by: Ferenco on March 18, 2012, 12:47:55 PM
I use an Excalibur with an Anderson shaft. It's a biit pricey but an excellent beach machine


Title: Re: a good beach detector
Post by: Nugget on April 06, 2012, 10:55:51 PM
Is a Garrett Ace 250 any good for the beach?


Title: Re: a good beach detector
Post by: dances with badgers on April 06, 2012, 11:11:06 PM
the garret ace is good on the dry sand but u have to turn sensitivity down a lot on the wet sand so u lose depth.good machines for coins :)


Title: Re: a good beach detector
Post by: Whiteduke on April 06, 2012, 11:29:38 PM
Not that much experience,I used to use my minelab on the beach,but since i got a cs4pi ,the minelab stays in the cupboard when I'm off to the beach,since using it my finds have improved for sure.

OK no discrimination ,but you soon learn what signals to dig,and its cheap compared to some,but IMHO its value.

If i had to gripe about the cs4pi the volume could do with a boost or maybe its me.

I lasted about 5 Min's with an ace 250 and that included the time it took to walk from the car to the beach.


Title: Re: a good beach detector
Post by: Nugget on April 06, 2012, 11:42:53 PM
Thanks for the advice, I was advised the Cscope 4pi is a specialist beach machine and not a lot of use inland before I made my choice. Something about the operating system being different to the inland machines to overcome the wet sand ground effect.
As I live about 40 miles from the sea and considering the recent price hikes for fuel I chose the 3mxi. I suppose time will tell if I made the right choice.


Title: Re: a good beach detector
Post by: dances with badgers on April 07, 2012, 07:11:30 AM
also different beaches are better with different machines for example pulse machines are better on beaches where the black sand is not very deep down.v.l.f machines cant cope with the black sand very well.the black sand traps heavy rings.
 other beaches like aberavon that are loaded with junk are better for v.l.f machines because you have to use a bit of discrimination to blank out all the iron.
 i know because i have tried both machines and watchrd others use both types of machines.not all beaches are the same,you will soon realise why when you put some time in.good luck mike


SimplePortal 2.3.3 © 2008-2010, SimplePortal