Title: ultimate Post by: raistlain on December 19, 2015, 09:52:04 AM reading through old E-trac posts etc and noticed time and time again the words "13 in Ultimate coil" keep cropping up.Is there much difference between this and the coil that comes with the E-trac ? and if so what ???
Title: Re: ultimate Post by: Chef Geoff on December 19, 2015, 10:56:56 AM This is a field test I did a few years ago which may help :-\
https://docs.google.com/file/d/0Bxtf-O7KMnEnbm5CdkFCQ2RRLWVmNW01cEN1UkYxQQ/edit?pli=1 Title: Re: ultimate Post by: troutmasterfunk on December 19, 2015, 12:17:28 PM Better ground cover a bit deeper overall a great addition to a great machine..👍
Title: Re: ultimate Post by: raistlain on December 19, 2015, 01:21:46 PM This is a field test I did a few years ago which may help :-\ https://docs.google.com/file/d/0Bxtf-O7KMnEnbm5CdkFCQ2RRLWVmNW01cEN1UkYxQQ/edit?pli=1 i didnt realise you tested stuff and wrote about it !!! thanks really good piece and very helpfull ....did you ever get to do the beach test with it and if so how did it do ? Title: Re: ultimate Post by: Val Beechey on December 19, 2015, 02:10:44 PM Hi raistlain, I've been down this road before and asked all the same questions. I don't think Geoff ever got around to a beach test. But I did after I bought one. It's as good on the beach as anywhere else. Great addition to the armoury.
Only 2 small gripes I had was the weight and pin pointing. Never quite sorted that out. The extra weight can be compensated for by adjusting the length of the stem but I don't s'pose it would be a problem for you anyway. Title: Re: ultimate Post by: raistlain on December 19, 2015, 04:18:35 PM thanks val im ok with the weight ive been out all day with the standard on no problems ...i do agree with pinpointing i find it hard and im garbage at it so getting a pinpointer.... i did what you did spade wise i got a stainless border spade had it ground into a shield shape and shortened the handle slightly works great :)
Title: Re: ultimate Post by: Chef Geoff on December 19, 2015, 04:36:04 PM Pinpointing is relatively easy if you use the "tip" technique all you need to do is just swing the coil over the target whilst moving the coil backwards towards you where you loose the signal the target will be in the cleft at the front of the coil ;)
Title: Re: ultimate Post by: raistlain on December 19, 2015, 05:40:22 PM ha ha ive certainly not been doing that ive been waving it around like mad getting frustrated as the pesky burried item keeps moving around ha ha ha thanks i will give it a go :)
Title: Re: ultimate Post by: raistlain on December 19, 2015, 06:26:24 PM Pinpointing is relatively easy if you use the "tip" technique all you need to do is just swing the coil over the target whilst moving the coil backwards towards you where you loose the signal the target will be in the cleft at the front of the coil ;) is this whilst in the pinpoint normal mode ? Title: Re: ultimate Post by: Val Beechey on December 19, 2015, 06:36:47 PM Just in normal detecting mode, without trying to use the onboard pinpointer. Good luck, hope you do better than I did.
Title: Re: ultimate Post by: raistlain on December 19, 2015, 07:01:22 PM ive had a few quick goes with a coin in the garden on the surface and it seems to be working just take a little practice i suppose ..just wish this constant rain and wind would bugger off :-[
Title: Re: ultimate Post by: Dryland on December 20, 2015, 02:04:59 AM Ah wind, try rennies or alka seltzer ;D
Title: Re: ultimate Post by: probono on December 21, 2015, 10:09:00 AM I don't know if this is any help, but (when I was using an SE Pro) I saw Mike using an ultimate coil on his Minelab, bought one myself (from Chef) and then found a hoard a week later (in the same field). :)
I still use it on my E-TRAC - certainly better ground coverage - don't personally notice any weight difference between it and the standard coil - only thing is that I should one day buy a small coil for use in stubble / maize stubble fields - but that's not complaining about the coil. I use (especially in park detecting) the 'cross' pinpointing - and that works well for me (i.e when the signal disappears for this one the item is pretty close to the indent on the coil). Title: Re: ultimate Post by: raistlain on December 21, 2015, 10:38:50 AM yes it helps thanks kind sir
|