|
Title: Deus beach settings please Post by: roger g on May 24, 2012, 07:47:11 PM Been out beach tectin today dry sand perfect but da wet stuff well awful can I have some settings please and also which gb to use when starting up cheers roger g ;D
Title: Re: Deus beach settings please Post by: rjm on May 24, 2012, 07:55:19 PM There is a wet sand program. My advice is to stick to that. The GB is set at 27...........so you need to make sure the upper reading is from 0 to 30. I wouldn't bother 'pumping' as I could never get it to work on wet sand. Use Manual adjustment but I just left it at 27. The machine can be a bit chattery.......you listen out for the good two way sounding signals. You will know when you have a coin or ring as the signal will be a LOT clearer. The only adjustments you could make is to lower the sensitivity a bit or up the Discrim level. Title: Re: Deus beach settings please Post by: roger g on May 24, 2012, 08:01:19 PM cheers for your reply as a rough idea what would you up the dis to roger g
Title: Re: Deus beach settings please Post by: rjm on May 25, 2012, 06:41:30 AM The factory program has the discrimination set at 27 This should be sufficient. Making this a bit higher won't really make a lot of difference to quietening the chattering So I'd keep it as it is. Just listen out for the repeatable two way signals.....they will shine through. |