DetectingWales.com

Metal Detecting Discussions => Metal Detecting Discussions => Topic started by: oldbenny on March 21, 2013, 09:36:34 AM



Title: xp dues coil clip
Post by: oldbenny on March 21, 2013, 09:36:34 AM
anyone had problems with the coil clip  it seems a weak link in this good machine  it seems the pins are very weak and bend very easy   or is it me being heavy handed


Title: Re: xp dues coil clip
Post by: Chef Geoff on March 21, 2013, 10:38:59 AM
No it's not just you, there are lots of posts across different forums from people who have broken their clip. It is a readily available part, probably for this very reason.
I would recommend to anybody to buy a second, even if it's only to keep in the bag for in car/on field charging, as without it any advantage that the Deus has is lost, as it just becomes a broomstick ;)


Title: Re: xp dues coil clip
Post by: galoshers on March 21, 2013, 03:04:38 PM
actually its easy to apply a charging voltage to the pins with a some bare wires from a charger wrapped round with a piece of duktape ..you get another  5v/1A  charger strip off the ends of the wires and wrap them round the pins with tape ,it works because i tested it myself.  ;D
make sure the polarity is correct .
you can keep a spare charger handy from Maplins or Poundland
or use the ciggy ligher plugin with the wires stripped back .


Title: Re: xp dues coil clip
Post by: oldbenny on March 22, 2013, 09:22:05 PM
actually its easy to apply a charging voltage to the pins with a some bare wires from a charger wrapped round with a piece of duktape ..you get another  5v/1A  charger strip off the ends of the wires and wrap them round the pins with tape ,it works because i tested it myself.  ;D
make sure the polarity is correct .
you can keep a spare charger handy from Maplins or Poundland
or use the ciggy ligher plugin with the wires stripped back .

dont know if i would try that  the  machine cost to much for that  but thanks for the idea


Title: Re: xp dues coil clip
Post by: mucker on March 22, 2013, 09:44:56 PM
It's only the contact
For a quick fix
Use two small pins into the charger clip
And bend them out wards
Make sure they make contact showing the light is permantly on
It will work untill you get your new clip


Title: Re: xp dues coil clip
Post by: rjm on March 23, 2013, 05:57:10 AM


The charging clips aren't that expensive.

If you get a second coil it's an idea to buy another so that you can charge both coils at the same time.

I haven't had any trouble with my two clips.


Title: Re: xp dues coil clip
Post by: outlaw on March 23, 2013, 06:03:14 AM
I'll 2nd that too, though I have bought another as a spare and can charge two coils also ! ;D


Title: Re: xp dues coil clip
Post by: JBM on March 23, 2013, 05:39:20 PM


The charging clips aren't that expensive.

If you get a second coil it's an idea to buy another so that you can charge both coils at the same time.

I haven't had any trouble with my two clips.


Good advice from Bob. ;) Jerry.


SimplePortal 2.3.3 © 2008-2010, SimplePortal