Detech Excelerator 11 18" Coil for Minelab Etrac

[Rob]

Too true mate, if you dont walk over it you have no chance of finding it

[wayno]

50 odd hammereds with the SEF range over the last couple of years, the WOT coil just isnt as stable and doesnt pin point or locate as good as the SEF coils, I dont go by Joan Allen reviews I go by my own experience and finds and if you have to choose between a wot and an SEF i would deffinatly suggest the SEF over the wot

Here is some of those I found using my SE and SEF Coils or ETrac and SEF Coil I am a no0b on here but a mod on the sister site Detecting Scotland

Some really nice finds there Rob as you say you have to walk over it but i have never found  a cut half with my etrac and 15 x 12 SEF and as i said i would be lucky to pick one up at 4" in soil maybe something wrong with my machine as i am just being realistic and honest. I have found 13 Hammered in last year  but no cut halfs and i do detect oin wales think we were all poor here

[Rob]

To be fair mate I have more success with the 12" x 10" SEF but the 15" x 12" SEF is awesome for getting the really deep ones that the 12" has missed, you do have to go super slow and listen for those tiny almost iffy grunts for the deep ones or cut halfs etc

[wayno]

To be fair mate I have more success with the 12" x 10" SEF but the 15" x 12" SEF is awesome for getting the really deep ones that the 12" has missed, you do have to go super slow and listen for those tiny almost iffy grunts for the deep ones or cut halfs etc

Someone told me that 12x10 sef was the better one. I have been looking out for one second hand on ebay but you might as well buy a new at the prices on ebay and have a years warranty with it
Wayne

[Rob]

12" x 10" is for sure my main coil and has been now for about 3 years, give it a try mate but really listen for those tiny signals that most people would avoid or miss, they tend to be the cut halfs, quarters etc etc

[wayno]

12" x 10" is for sure my main coil and has been now for about 3 years, give it a try mate but really listen for those tiny signals that most people would avoid or miss, they tend to be the cut halfs, quarters etc etc

Thanks Rob for all your advise mate well appriciated will look out for a 12 x 10 coil
thanks
wayne

[Rob]

no problem dude and good luck when you get one, pm me anytime if you need any help re the coil etc

[wayno]

no problem dude and good luck when you get one, pm me anytime if you need any help re the coil etc

Cheers Rob hope to meet up you Scots one day for a good rally

[Rob]

sounds like a plan

[wayno]

sounds like a plan

Rob Tafflaff keps on promising a good rally with you lot up theremay be a 2 dayer hope he can pull it off some day. It would be a good thing to meet our cousins

[Rob]

Yeah spotted that on DS, looks like it could be fun and would be awesome to meet up with a lot of you guys too

[wayno]

Yeah spotted that on DS, looks like it could be fun and would be awesome to meet up with a lot of you guys too

You can show me where i am going wrong. Looks like you know a few tricks with all them hammered you have found

Well done mate

[Rob]

I know my machine well will show you what I can mate, most people are stuck in their ways and dont want shown anything new with their machines so i tend not so say anything, would rather not offend anyone than give advice that might not be taken well but yeah I can show you what I do and my settings and tricks etc and let you see the difference with the SEF's etc no problem

[wayno]

I know my machine well will show you what I can mate, most people are stuck in their ways and dont want shown anything new with their machines so i tend not so say anything, would rather not offend anyone than give advice that might not be taken well but yeah I can show you what I do and my settings and tricks etc and let you see the difference with the SEF's etc no problem

Cheers Rob been nice speaking to you look foward to meeting you one day

[Rob]

You too mate, take it easy and good luck with the hammereds