|
Title: GOLDMAXX Coil Plug ? Post by: Da Monkey on July 12, 2012, 03:50:54 PM Hi Guys,
Does anyone have a manufacturers part number or suppliers part number for the XP Goldmaxx Coil plug ? Its a long shot... Cheers, Andy Title: Re: GOLDMAXX Coil Plug ? Post by: Chef Geoff on July 12, 2012, 05:46:18 PM Hi Andy
I haven't got an XP to check but I have a horrible feeling that the coil plug is a mini 6 pin female DIN plug which is a bit unique to to XP. I think Nigel at Regtons may be your best bet and if he cant/won't help then contact XP direct. And if you still don't have any luck, I can get you one but it may take a week or two ;) Title: Re: GOLDMAXX Coil Plug ? Post by: Da Monkey on July 12, 2012, 06:19:00 PM Cheers Geoff,
I've had a good hunt through all the usual suppliers and there are some close ones, but no cigar... :( They are very close to some but the centre pin is just that little bit off the centreline to make me think that the "close" ones may not be close enough... I'll have a word with Nigel as you suggest, but as there are 3rd party coil manufacturers out there, there must be a manufacturer somewhere, I just wanted to have a play with the machine for myself ;) I can bodge a solution, but its not the best, will have to have a talk with you I think, I wonder if anyone in your contact list has an answer ? ;) ;D Are you off to the Hereford rally this weekend BTW ? - Andy Title: Re: GOLDMAXX Coil Plug ? Post by: Chef Geoff on July 12, 2012, 06:25:29 PM It's still in the balance at the moment Andy. I think the plug is a high-bride of two different types and the coil manufacturers order in thousands so they can get them.
I can probably get you one from Detech if you have no luck. Title: Re: GOLDMAXX Coil Plug ? Post by: Da Monkey on July 12, 2012, 06:29:22 PM Yes I think you are on the right lines with the bastardised DIN type of plug Geoff, its almost like a microphone plug with the pinout layout, just with DIN plug sized pins, these are close, but no cigar... http://www.lumberg.de/main/common/produkt_fs.asp?lang=eng&produktname=0322_1&wg=003&cat=2&newWin=1 (http://www.lumberg.de/main/common/produkt_fs.asp?lang=eng&produktname=0322_1&wg=003&cat=2&newWin=1) I just cant seem to find the layout in DIN sized plugs anywhere :(
I'd be very interested to see how much anyone you know would be looking for for say a male & female set ;) Meanwhile I'll carry on searching I guess, I hate it when manufacturers play games... - Andy Title: Re: GOLDMAXX Coil Plug ? Post by: Da Monkey on July 12, 2012, 06:33:05 PM I'm not over worried at the moment about the outer locking thread, just need the same pin layouts BTW ...
|