DetectingWales.com

Hi Guys
Managed to get back to the field where I had my first hammy from, the quiet one :-\. thought I would max out the euro's sensitivity and notch out the bars that was falsing. Had some nice coins from a cartwheel to six pences(upload later) And this Strange hammy I.D please
Cheers
TF

no idea but very nice...well done

nice hammered never seen one either maybe a disney one with that castle LOL ;D

Really nice coin mate never come across one of them before.

Herbie

well ferreted .nice coin :o

Cheers Guys it measures 20mm Here is some better pics.
Cheers
TF

Now that is in fantastic condition, Lovely find Morley and a very unusual one for around here. It's a esterlin issued by Jan II van Brabant. 1294-1312 and the Duchy of Brabant (Belgium and part of Holland).

Well done Ferret for finding It. And Well done Geoff On ID ON it I Have never seen one before

love that !   what a fab coin well done.

H

Again very nice coin and and great id Geoff!!!!

OK managed to find one
http://www.mcsearch.info/record.html?id=105748 (http://www.mcsearch.info/record.html?id=105748)

Well i'm lost for words has to be my favourite hammy ;D I thought it was strange not seeing a bust on one side :o. I found it late in the day and even though I managed to pick out some coins, I was thinking that the settings would lower my chances of a hammy.

Cheers Guys.
Happy Ferret ere :P

belgian ?

No, Brabantian, no such country as Belgium before 1830

just checking master dont beat me  ::)

I like it! Makes a nice change to seeing a kings head which all look pretty much the same to me.

very nice mate  ;D

wwwooww what a beauty mate..welldone indeed.
ray.

Cracking find mate, I have a caravan in Brean we will have to have a day out you can show me the ropes.

well done ferret another exellent find ,and a unusual one at that ,cracking id chef  8)

http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=31147&cat=all (http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=31147&cat=all)
???????? ???
TF

Lovely find, really like that.

Well done

Charlie

Really lovely coin-and unusual too.Love it! Well done Ferrett :)

Morning guys
i just found this on the web, same you think?
http://www.noble.com.au/auctions/lot/?id=213610 (http://www.noble.com.au/auctions/lot/?id=213610)
Cheers
TF

LOL Morley, did you read my post? yes that's it, Jan II as I said. What more are you looking for?

Sorry mate I got a little mixed up and it was me that posted Jan III :P
Cheers
TF

Now i'm confused ???
http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=35792&cat=500 (http://www.ukdfd.co.uk/ukdfddata/showrecords.php?product=35792&cat=500)
TF

fantastic find Ferret. Amazing condition too. At this rate you'll be able to buy that Deus soon lol.

Any chance you could tell me what settings you used ? or is it a secret ? I haven't a hammered coin to test my Euroace on and I'd hate to descrim it out.

Nice coin Ferret you must be well stoked.  I found one last year; not in as good condition as yours though  :)

Lovely coin great condition

Morning mate
It was around 10" deep. I checked this with the probe (being 9") I was at the bottom of the hole and at a slight angle. I set the euro to MAX sens but was getting some falsing, so i notched out the segments that was falsing from iron to foil this stopped it falsing (audio) but could still see the segments activate. It gave me slight blipps one direction and slightly better at 90 deg's so I dug a test plug about 3" deep and then the signal changed to a good coin.
Cheers
TF

by notching out foil wouldn't you be lowering your chances on cut halves and cut quarters as i thought these came in on foil signals ?

Hi Mate
Yes I did think about this, but it was hard going on the day and finds were slow, so I thought about changing the settings to see what would turn up. It might have just been luck thou.
Cheers
TF